SimScale simulation projects by vkarads | Page 1

vkarads's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Impeller and diffuser compressor assembly

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Compressor system for a micro gas turbine

Stresses acting on impeller at different rotation speeds

This  project analyzes the aerodynamics of a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

diesel fuel distribution in model gas turbines

axial compressor and turbine blade flow  anlysis

Public Profile

vkarads's profile