SimScale simulation projects by vgon_alves | Page 1

vgon_alves's profile

The purpose of this project is to validate the accuracy of the solver for transport and distribution of Gas (passive scalar) in an indoor environment.The airflow pattern (velocity) and concentration results from CFD are to be compared with experimental data obtained from full-scale tests.

Testcase project which just shows the power of SimScale to perform such kind of structural analysis. Nothing can be exactly validated here.

Case covered in the Academics Week of Mechanical Engineering - SAEM2018, Brazil. https://saem.unifesspa.edu.br/

The purpose of this project is to validate the accuracy of the solver for indoor convective heat transfer. The velocity and temperature contours are to be compared with the proposed results.

CFD Pro Training Exam - Check valve analysis

Handout  for Sports Aerodynamics Workshop: Session 3

This work aims to present the use of FEM in the analysis and design of an auxiliary device for the torque of the piston fixing nuts in hydraulic cylinders.

CFD Applications Engineer Assessment Task.

Conjugate heat transfer analysis - heat sink

Analysis a generic planing hull form and compare with experimental results

Another attempt, using a solid, half model!

That funny project aims to serve as a basis to assist you in designing cases with solid body rotation and forces that act due to rotational behavior.

Water flow from the tank of a water closet down. Kind of a fun project but with a very interesting analysis on the shear stresses on the inside walls dependent on the different designs, showing a much better performance for the design introducing a rotational flow.

That funny project aims to evaluate the turbulence profile in 3 different types of milk carton. This design can serve as a basis to assist you in designing cases with solid body rotation and fluid behavior.

The aim is to dimension the mast of a light pole of 11 meters high with variable diameters. The implementation of the project will be in the patio of Raízen in Marabá-BR, located on the railroad.

One of the cases to be addressed in the Workshop at the Federal University of South and Southeast Pará

This project intends to demonstrate a possible failure in the sterile waste pile dam of an iron mine with a real topography of the Gelado's Dam region, located in Carajás, Brazil.

Multiphase simulation of a droplet hitting the water.

This project establish a comparison between 120mm and 130mm EBT valve.

Public Profile

vgon_alves's profile