Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
2 Geometries
4 Meshes
1 Simulation setup
0 ResultsAirflow study of a two-layer PLA laptop cooler with 60 aluminium heatsinks and two 40 x 40 x 10 mm blowers supplied at 12 V. Ambient inlet assumption: 30 degrees C. Assess pressure losses, flow distribution and outlet temperature; compare with a no-heatsink configuration. Fan pressure-flow curve is not yet available, so any assumed-flow cases must be labelled as sensitivity studies, not validated fan performance.
by simscalesimscale
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
vardhanrajdon created this project
4 days ago
2 Geometries 4 Meshes 1 Simulation setup 0 ResultsAirflow study of a two-layer PLA laptop cooler with 60 aluminium heatsinks and two 40 x 40 x 10 mm blowers supplied at 12 V. Ambient inlet assumption: 30 degrees C. Assess pressure losses, flow distribution and outlet temperature; compare with a no-heatsink configuration. Fan pressure-flow curve is not yet available, so any assumed-flow cases must be labelled as sensitivity studies, not validated fan performance.
