SimScale simulation projects by teetops | Page 1

teetops's profile

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this exercise, you will complete a laminar pipe flow analysis

Public Profile

teetops's profile