How Leaders are Escaping AI Pilot PurgatoryRegister here
vacuum pump
0
0
Statistics
0 Geometries
0 Meshes
0 Simulation setups
0 Results
0 Geometries 0 Meshes 0 Simulation setups 0 ResultsAbout this project
This project simulates a passive water flow system using a sealed 20-liter container connected to an inlet pipe, an outlet pipe, and an air control line. The goal is to study how pressure differences and partial vacuum inside the container can drive water movement without using an electric pump. Water exits through the bottom outlet, creating a pressure drop inside the tank. Atmospheric pressure then pushes water upward through the inlet pipe into the container. The simulation will analyze: - water flow rate - pressure distribution - vacuum formation inside the container - effects of pipe height and diameter The system is intended for low-cost aquaculture applications such as assisting water circulation or aeration support in catfish ponds.
