Looking for porous media simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Modeling a porous media 
Model a porous madia with pores

This project aims at investigating the impact of trees as porous media in mitigating the wind effects affecting pedestrian wind  comfort.
A comparison between two scenarios is undertaken, one using an urban model with no trees and one using trees. The areas of significant improvement in wind comfort and reduction in wind velocity are highlighted.

HVAC project showcasing the modelling of louvres using the porous media concept.

Es una prueba del modelo de porosidad en un muffler

The aim of the project was to implement a porous media option and try to understand the basic concept behind through CFD setup. for this case, incompressible flow simulation type was used. In this case, the pressure drop across the two was calculated and done some iteration.

The objective of this simulation is to demonstrate how to prepare a geometry with extreme terrain (mountainous area) and then simulate it in the PWC analysis type.

Check out www.simscale-academy.com for more classes on simulation.

Project dedicated to understanding the  aerodynamics of a relatively modern road-going hatchback and  ways of improving them.  Self-made model means the results are unlikely to be highly accurate.

The project currently is more about learning about simscale, than immediate results analysis.

The objective of this project is to show how users can create bodies with porosity using the platform. 
The porosity can be created inside a part of the CAD model or a Geometry Primitive. The user is free to place and build this Geometry Primitive as desired.
This project can be used as a template to create porosity in different ducts or ventilation systems.

Automotive Catalytic Converter exhaust flow analysis using Porous Media.

porous media | SimScale Project Library | Page 1