Looking for oil and gas simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

CFD simulation of oil-gas two-phase flow in pipeline using VOF method 

Regulator failure pressure buildup with a MP-LP Station with relief set points to 0.55 psig

practice seminar stokes flow  cylindrical coordinates, axisymetrical.

create  a simulation about separator oil and gas

This project is for school and were going to use the fluid simulation for pressure. the goal of this project is to create a device which involves pressure and temperature

Wave Impact on an Offshore Drilling Rig Platform and Multiphysics

FEA- Offshore reel hose- case 1 testing Tension, Torsional & Bending Load

Wave Impact on an Offshore Oil-Rig Platform

TO FIND FLUID HOMOGENEITY BY THROUGH C1/C2

Pipes in Oil and Gas Industries are widely exposed to higher temperatures and pressures which might lead to blowouts. In order to prevent pipe breakage due to blowouts, closing and sealing of pipes is of high necessity. For this, the pipes are Simulated for Nonlinear case with larger deflections and contacts using two flat stiff indentors.

Burst pressure analysis of a steel 20 lb propane tank.

This project shows the stress analysis of a polytetrafluoroethylene (PTFE) oil seal is performed both with friction and without friction.