Looking for cooling simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 2

this project is to test differnet cooling plate simulations

Verify the steady state temperature of the heat break  to avoid heat creep which causes filament expansion and jam.

Room air flow with 1 window opening and a sliding window panel

Cooling of a hot electrical component with forced flow convection with a LES turbulence model

thermal Simulation of a water cooled plate

The goal of this project is to simulate the simplified version of the cooling system of the HP Workstation Notebook.
This is a Conjugate Heat Transfer (CHT) problem. Incompressible turbulent flow was assigned for the air flow. Two cooling scenarios are going to be investigated
1- Current cooling system 
2- External cooling fan assisted system

Optimization Printer Cooling of an Ultimaker Original with 1 and 2 nozzles

Electronic cooling is a vastly important topic, as failure to sufficiently cool a component within a system will lead to overheating, reducing the component's lifespan or in severe cases damaging the component.

Water cooling is a great option for higher power application, and this webinar will demonstrate how CFD can be used to ensure that there is sufficient cooling, and how to ensure its efficiency within a system.

Simulation of cooling of the Li-ion cells using convective cooling using centrifugal fans

Make a comfortable room with Temperature is 25 degree celcius and relative humidity is about 50 percent

- to learn the procedures for modal analysis
- simple plate with one end fixed

Simulation of blower fan for cooling parts during 3D printing

A 42U server rack has to be cooled at all times

This project is for testing my 3D printer cooling nozzle.

Temperature Reduction and Energy Saving for Data Centers
In this webinar, you will learn how CFD can help you analyze data center designs and ensure energy efficiency for different standards

Simulation Control Data forked from fp-023d

The project shows how to use FEA to accurately predict the performance of a thermal shipper pack.

FEA thermal simulation on an electronic enclosure design purely through conduction

To analyse the cooling and heat effect of the module at different temperatures

Design of a cast aluminum heatsink for a 100W computer CPU

Modified cooling body with longer in- and outlets. The goal is still to get the pressure
loss.

A 2 stage thermoelectric cooler with water jacket.

(12x) Laird PC12,139,F1,3550,TA,W6 peltier devices, 9 in first stage, 3 in second stage.  
(1x) AAVID 416101U00000G chilled water cold plate.

Passive and Active convection cooling of a Raspberry Pi mother board design .

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.
You can find the tutorial for this project here: https://www.simscale.com/docs/tutorials/conjugate-heat-transfer-cooling-of-electronic-sink/

This project is part of session 1 of the Air Conditioning and Ventilation webinar. It shows how the cooling of a Data center room can be simulated using SimScale.

This project shows how the cooling of a room can be simulated using SimScale.

cooling | SimScale Project Library | Page 2