SimScale simulation projects by subhkaran_foam | Page 1

subhkaran_foam's profile

data center flow analysis and cooling - Copy

This validation case belongs to fluid dynamics. The aim of this validation case is to validate the conjugate heat transfer(CHT) v2.0 analysis implemented in SimScale.
The simulation results of SimScale were compared to the results presented in the study titled  Unshrouded Plate Fin Heat Sinks for Electronics Cooling: Validation of a Comprehensive Thermal Model and Cost Optimization in Semi-Active Configuration written by L. Ventola, G. Curcuruto, et. al. - Copy

pump curve calculations for a centrifugal pump - Copy

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

subhkaran_foam's profile