Set up your own cloud-native simulation in minutes.Start Simulating Now
Impeller Stress test
0
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
1 Result
1 Geometry 1 Mesh 1 Simulation setup 1 ResultAbout this project
Goal is to stress test a 3d Model Impeller with a blade thickness of only 0.5mm (PetG) Fluid Simulation A 3d Centrifugal Impeller model With 12 blades of 0.5mm thickness and a fillet at 0.15mm at the Blades not affected by the shroud, and 0.5mm filet on the shrouded blades
