SimScale simulation projects by sscully | Page 1

sscully's profile

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Attempt to do a more complete analysis of the reinforcement before and after

attempting to see if I can figure out how to show welding distortion.  And yeah, I'm in waay over my head lol

An attempt to see how hot a furnace frame can get

Determining the most rigid support for a LMS 3990 mini mill column

Experimenting with reinforcing a 1x6 plank

trying to determine if beam, solid or tubing is stronger

An attempt at trying to figure out how to simulate fluid dynamics

Trying to determine best shape for a 3d printed plier arm

Try to determine best design for a first class lever

Bracket attached to gas strut and ladder rung

In this project the functionality of centrifugal force on the SimScale platform is validated through a static analysis of a cylinder under rotational load.

Experimental drawer slides made of steel tubing

Tutorial project for linear static analysis of a crane

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

sscully's profile