SimScale simulation projects by ssagarb1999 | Page 1

ssagarb1999's profile

Internal flow gave a lot of vel. output, so trying with external flow

To see the effect of aerofoil shape within the shield

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

to check the behavior of concentrator behind the shield

shield_to catch more air by using speaker design horns and waveguides

To reduce the slippage of wind at the top and bottom of the shield

To see if the increased curvature could catch more wind.
using incompressible simulation.

The changes in the design are an increase in the curvature and the nozzle type loft is removed and replaced with normal loft.

To see if more curvature helps to catch more wind.
incompressible sim

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

ssagarb1999's profile