SimScale simulation projects by smabaso | Page 1

smabaso's profile

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for the flow of fluid through a pipe junction

Public Profile

smabaso's profile