Set up your own cloud-native simulation in minutes.Start Simulating Now
Finite Element Analysis of Stepped Aluminum Shaft under Multi-load Condition
0
0
Statistics
1 Geometry
3 Meshes
1 Simulation setup
6 Results
1 Geometry 3 Meshes 1 Simulation setup 6 ResultsAbout this project
Computational simulation of displacement and stress distribution in a three-segment stepped shaft made of aluminum (E=70 GPa) with diameter variations of 981nm, 1918nm, and 99nm. Analysis includes applied forces of 600nm, 651nm, and 551nm with one end rigidly fixed.
