SimScale simulation projects by saurabh_sharma | Page 1

saurabh_sharma's profile

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Learning Tet-Dominant algorithm: Pipe-flow meshing tutorial

Simplified 1/4th model of a pretensioned bolt and of two compressed plates.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project a static analysis of a shaft subjected to a user defined rotation and a cyclic boundary condition is demonstrated.

Public Profile

saurabh_sharma's profile