Set up your own cloud-native simulation in minutes.Start Simulating Now
bluff body
104
0
Statistics
1 Geometry
2 Meshes
1 Simulation setup
2 Results
1 Geometry 2 Meshes 1 Simulation setup 2 ResultsAbout this project
Instructions: The mesh has to be a hex-dominant parametric mesh, with a mesh bounding box as given in the picture. GIve the mesh resolution in X, Y, and Z directions as you wish, but make sure the cells are proper. You will have to give additional boundary conditions for tires, i.e. a rotating wall. Also, remember to apply a forces and moment result control item for each component and the whole car. Once the meshing is done, check the mesh quality first before proceeding with the setup of the simulation. DO NOT RUN THE SIMULATION WITHOUT OUR APPROVAL. The deadline for at least creating the mesh is 7 pm today. Pro tip: Creating a topological entity for each device using the box selection tool really helps a lot. Try creating topological entities for the geometry before the meshing and before setting up the simulation. And as always, call or text me or Swarangi if you have any questions
