SimScale simulation projects by sam89282 | Page 1

sam89282's profile

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Forces acting on a dropped drill pipe string after a fingerboard operation failure - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

Geometry for the enclosure snap fit tutorial.

Tutorial project for linear static analysis of a crane

Public Profile

sam89282's profile