SimScale simulation projects by sadeghir97 | Page 1

sadeghir97's profile

Quarter model of a 3D printed drone frame

Trying to see if the module is going to receive sufficient cooling.

Second iteration features a staggered pattern. With the cells packed closer together, we want to make sure that the cells still won't overheat.

Ensuring brick receives sufficient cooling on test bed.

The air flow around a football is simulated with focus on the effects of the pattern on the football surface and spinning of the ball.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

NACA 4412 airfoil with winglet simulation

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Seeing how much drag I produce on my Schwinn Sanctuary 7 cruiser

Public Profile

sadeghir97's profile