Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
1 Geometry
3 Meshes
1 Simulation setup
1 ResultConjugate heat transfer analysis of the existing six-fin tapered aluminum heat sink used for electronic cooling in an inverter air-conditioner outdoor-unit application. The final reference case uses a 48°C air inlet temperature, 1.5 m/s inlet velocity, and a controlled 20 W heat load. The model will be used as the reference configuration for comparison with the proposed optimized heat-sink design under identical boundary conditions.
by Jon_WildeJon_Wilde
rpregada created this project
13 days ago
1 Geometry 3 Meshes 1 Simulation setup 1 ResultConjugate heat transfer analysis of the existing six-fin tapered aluminum heat sink used for electronic cooling in an inverter air-conditioner outdoor-unit application. The final reference case uses a 48°C air inlet temperature, 1.5 m/s inlet velocity, and a controlled 20 W heat load. The model will be used as the reference configuration for comparison with the proposed optimized heat-sink design under identical boundary conditions.
