SimScale simulation projects by ronnie007 | Page 1

ronnie007's profile

Basic understanding of Turbomachines working using simulation.

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

The effect of numerics on the simulation quality and convergence time.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

FSAE-Workshop-S3- Yaw angle- Analysis-Simulation

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Effect of number of propeller blades and their angle of attack on the lift of the drone.

Structural Design  of a Drone with various varying parameters

FSAE-Workshop Session-4 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

Public Profile

ronnie007's profile