SimScale simulation projects by raymond_igbokw | Page 1

raymond_igbokw's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The effect of numerics on the simulation quality and convergence time.

In this exercise, you will complete a laminar pipe flow analysis

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

The project illustrates how to simulate airflow around a complex F1 vehicle.

Incompressible Fluid Flow analysis of two globe valves

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

raymond_igbokw's profile