SimScale simulation projects by ravirajmakadia | Page 1

ravirajmakadia's profile

Heating of water tube if tube is maintained at a fix temperature

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up a Multi-phase flow simulation

Thermal Analysis of Electronics under enclosure

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

In this exercise, you will complete a laminar pipe flow analysis

Public Profile

ravirajmakadia's profile