SimScale simulation projects by ragemandav | Page 1

ragemandav's profile

structural analysis of a wooden bike frame

Flow simulation in a home made subsonic wind tunnel

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Simulation of a rotating home made wind turbine

Air cooling inside a chamber. Different Set up comparison

Behavior of wind crossing through buildings in order to find spots to place a small wind turbine

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project demonstrates the usage of rotating zones

Public Profile

ragemandav's profile