SimScale simulation projects by raahul_pu | Page 1

raahul_pu's profile

In this project, we analyze the structural behavior of a basketball board when a dunk shot is performed.

In this project, thermal solvers of SimScale are validated by simulating high power LED packaging with different on sink placement.

In this simulation, we analyze the structural behavior of a chopper (motorcycle) frame.

Static analysis of a wall hook is performed to test the maximum load it can withstand

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The filter media is glued to the metallic end caps during its production and the bonding strength of the glue is tested using tensile strength analysis.

Public Profile

raahul_pu's profile