Set up your own cloud-native simulation in minutes.Start Simulating Now
Centrifugal Pump
0
0
Statistics
0 Geometries
0 Meshes
0 Simulation setups
0 Results
0 Geometries 0 Meshes 0 Simulation setups 0 ResultsAbout this project
In this project, the performance of a centrifugal pump was analyzed using SimScale CFD simulation software. A 3D model of the pump was imported into SimScale and meshed, followed by defining the rotational motion of the impeller. Boundary conditions such as inlet pressure and outlet flow rate were applied. The simulation provided results showing velocity vectors, pressure distribution, and streamlines inside the pump. These results helped in understanding the increase in fluid pressure from inlet to outlet and the overall flow behaviour. The simulation also assisted in visualizing pump efficiency and identifying possible losses or cavitation zones.
