SimScale simulation projects by oscarcorripio | Page 1

oscarcorripio's profile

This project demonstrates the usage of rotating zones

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

In this project vibration analysis of jet engine is performed.

The effect of numerics on the simulation quality and convergence time.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Homework assignment project for the Air-Conditioning and Ventilation webinar session 2.

This project simulates the natural convection in a kitchen

This project contains everything you need to work on the second homework assignment of the drone workshop

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

This project includes everything you need to get started with the homework assignment of our makers workshop

External Flow Simulation of a UAV plane. 


This project contains everything you need to work on your homework assignement

Test for a structure for the Firefly Arts Collective Festival

This project shows how to simulate the airflow inside an office space.

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

This project involves the simulation of ventilation in an aircraft cabin. There are 6 comparison configurations with 3 different inlets and 2 outlets.

Public Profile

oscarcorripio's profile