Set up your own cloud-native simulation in minutes.Start Simulating Now
COMPARISON OF BOUNDARY LAYER MODELLING TECHNIQUES IN OPENFOAM
320
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
0 Results
1 Geometry 1 Mesh 1 Simulation setup 0 ResultsAbout this project
In this study, K-epsilon, K- omega, and K- omega SST modeling will be used with the help of OpenFOAM and turbulence. Reynolds number changes for each Reynolds number, the Y+ and turbulence models will be replaced. Finally, after determining the parameters, how the results change will be obtained by comparing them with each other.
