SimScale simulation projects by neldlbk | Page 1

neldlbk's profile

Project requirement is to design a hot plate which has 20x TO-247 devices mounted on one side. These devices need to be kept at a junction temperature of 150degC. The heat source is provided by power resistors mounted to the opposite side of the plate. Assuming all resistors have the same power output, what is the most practical layout to ensure that each device is kept within 1 degC of 150degC.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

neldlbk's profile