SimScale simulation projects by nal_obeidat | Page 1

nal_obeidat's profile

See how to setup and run a low speed drop test dynamic analysis of a plastic bottle being dropped from 1m height.

Apply elasto-plastic properties to the bottle material using a bilinear model with perfect plasticity. - Copy

We are going to simulate a drop of a phone (iPhone X in our case)  from 1 meter - Copy

study of drop test for iphone 6 with & without case - Copy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

nal_obeidat's profile