How Leaders are Escaping AI Pilot PurgatoryRegister here
Tutorial: Fluid Flow Through a Valve Testing Mesh Independence
166
0
Statistics
2 Geometries
1 Mesh
1 Simulation setup
2 Results
2 Geometries 1 Mesh 1 Simulation setup 2 ResultsAbout this project
I am increasing the fineness of the mess to 8 and leaving all of the other variables as standard. I am checking if the results are mesh independent. I will not change any other variables. The results of this run are Cut 1s Pavg 2.48e+5 Pa, Cut 2s Pavg -2.365e+3 Pa, and the pressure residual was 0.0479. The results of the solution file unchanged are Cut 1s Pavg 2.556e+5 Pa, Cut 2s Pavg 1.083e+3 Pa, and the pressure residual was 0.0205. The flow behaviors were very similar between the runs.
