SimScale simulation projects by mohsinkn | Page 1

mohsinkn's profile

Checking the affect of size and number on thrust

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Checking how big the motor can be without affecting the thrust

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

Testing regarding  the motor size for the propeller

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Computation of the thermal comfort and flow field inside a car cabin

Conjugate heat transfer simulation tutorial.

Checking Thrust if it increases with the use of the duct

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mohsinkn's profile