SimScale simulation projects by mkushwaha | Page 1

mkushwaha's profile

The first part of the exercise will be setting up the base mesh,then duplicating it to vary the properties of layer refinement.The second part will be setting up the simulation with appropriate settings and result control items in order to properly analyse the results.

Effect of number  of propeller  blades on the lift of drone.

It is a very good example for us to simulate leg of a chair, to calculate results after application of forces on the chair.

To investigate the performance of the airplane - in particular the wing - by looking at drag and lift forces at different angles of attack.

This  project analyzes the aerodynamics of a spoiler

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for linear static analysis of a crane

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mkushwaha's profile