SimScale simulation projects by mikeray | Page 1

mikeray's profile

This project simulates the exhaust from a 1-5-3-6-2-4 firing order of a 6-cylinder engine.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for In-compressible Turbulent flow through a cyclone seperator

This project shows an example of how the internal airflow through an air intake can be analyzed.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Public Profile

mikeray's profile