SimScale simulation projects by mike_talbot | Page 1

mike_talbot's profile

Seeing where the stresses occur in the handle

cylinder filter w/ open hole in front of casing

Added some floating obstacles for my awful idea to see how the air flows around them

Same as before but with obstacles in place to ensure airflow is going to the right places

Back has the downward flow as before, and now a diagonal jet is sent to the front to try and counteract the upward flow

Remove the whole fan assembly at the top - We can solve that issue independently

Just Splitting the air in half - Ignoring the constraint of the top slot

Wanna put a cat in the wind and see how aerodynamic it is

Now with all external measurements instead

Air comes in at top, want to see how it goes around the box

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mike_talbot's profile