**Description: 3-Blade Propeller Hub Assembly (CAD Model)** This is a simplified 3D model of a constant-speed, three-blade aircraft propeller of the type used on turboprop aircraft. It shows the hub with the front of the spinner cut away so the internal region is visible. It is modelled in millimetres, with the X axis as the axis of rotation. **Components** - **Spinner:** a thin-walled, bullet-shaped nose cone, cut away over about 60° of its circumference (it covers 300°). - **Hub:** a stepped cylindrical body with a larger ring where the blades attach. - **Blades (3):** tapered elliptical blades, each about 650 mm long, spaced 120° apart around the hub. **File details** - **Format:** STEP AP214 (`Propeller_Hub_AP214.step`), which opens in SolidWorks, CATIA, Fusion 360, Inventor and others. - **Bodies:** 5 separate solids (spinner, hub, 3 blades), faceted, not smooth editable surfaces. - **Companion file:** `Propeller_Hub_SolidWorks.bas` builds an editable native SolidWorks version. **Simplifications:** there is no blade twist or airfoil section, and no internal pitch piston, bearings, bolts or logos. It is a representative shape for study, display or assembly use, not a manufacturing drawing. If you meant something else by "description" (for example, a description for a report, a drawing title block, or the CAD file's metadata), tell me which and I'll adjust it.
meganathankris created this project
**Description: 3-Blade Propeller Hub Assembly (CAD Model)** This is a simplified 3D model of a constant-speed, three-blade aircraft propeller of the type used on turboprop aircraft. It shows the hub with the front of the spinner cut away so the internal region is visible. It is modelled in millimetres, with the X axis as the axis of rotation. **Components** - **Spinner:** a thin-walled, bullet-shaped nose cone, cut away over about 60° of its circumference (it covers 300°). - **Hub:** a stepped cylindrical body with a larger ring where the blades attach. - **Blades (3):** tapered elliptical blades, each about 650 mm long, spaced 120° apart around the hub. **File details** - **Format:** STEP AP214 (`Propeller_Hub_AP214.step`), which opens in SolidWorks, CATIA, Fusion 360, Inventor and others. - **Bodies:** 5 separate solids (spinner, hub, 3 blades), faceted, not smooth editable surfaces. - **Companion file:** `Propeller_Hub_SolidWorks.bas` builds an editable native SolidWorks version. **Simplifications:** there is no blade twist or airfoil section, and no internal pitch piston, bearings, bolts or logos. It is a representative shape for study, display or assembly use, not a manufacturing drawing. If you meant something else by "description" (for example, a description for a report, a drawing title block, or the CAD file's metadata), tell me which and I'll adjust it.