SimScale simulation projects by maxdesign1990 | Page 1

maxdesign1990's profile

This project is to see the flow of hydraulic flow passing a released steel sphere into a valve outlet.

This project is to test the heat transfer from a Fisker Electronik SK 42 to the air with a SOT 227 power mosfet attached that which has a heat dissipation of 4.95W.

This project is do a analysis on the temperature versus time when a PCB Copper bar (exposed to the air) is subjected to a 34.9 amp current that produces 0.008185 Watts within the piece.

This project is do a analysis on the temperature versus time when a solder trace (exposed to the air) is subjected to a current that produces 1.872 Watts energy within the piece.

To test the release of pressure from a vessel at different volumes at 630 bar to atmospheric pressure through a orifice. This is to relate the vessel volume to the time it takes for the vessel pressure to equal the atmospheric pressure.

To test the release of pressure from a vessel at different volumes at 630 bar to atmospheric pressure through a orifice. This is to relate the vessel volume to the  time it takes for the vessel pressure to equal the atmospheric pressure.

This project is to the test the release of pressure from a cylindrical volume when the release valve is open to the atmosphere.

This project has been created to test the internal fluid flow of a non-compressible Newtonian fluid through a open needle valve

The goal of the simulation is to  check the deformation of metal tubes when compressed by a punch and die.

Public Profile

maxdesign1990's profile