SimScale simulation projects by matthew_coburn | Page 1

matthew_coburn's profile

Testing different setups for the AMG GT3 Race cae - Copy - Copy

Aerodynamic simulation of simplified 350z with N1 Wing - Copy

The goal is to make a realistic Nascar gen 6 - Copy

This project contains everything you need to work on the second homework assignment of the drone workshop

This project contains resources for Session 1 of the F1 Workshop

This project simulates flow around a rotating keel of a sail yacht.

This project simulates the free movement of floating boat under a wave using 6 DOF motion.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Hydrofoil for Foil board with 2 Degrees AOA

F1 workshop - Rear Wing Parametric Analysis

This project shows an example of how the external fluid flow around a submarine can be simulated.

Public Profile

matthew_coburn's profile