SimScale simulation projects by malmat | Page 1

malmat's profile

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project with the goal of simulating the wave effects on a boat.

Public Profile

malmat's profile