Set up your own cloud-native simulation in minutes.Start Simulating Now
Step-by-Step Tutorial Session 3 - Yaw Angle Study
264
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
1 Result
1 Geometry 1 Mesh 1 Simulation setup 1 ResultAbout this project
For your homework, your task is to investigate the full car running in a straight line at 20 m/s with side wind. You will have the same model we used for the last session, so you will setup porous media, MRF (rotating) zones, rotating walls, and the flap angle will be 0 degrees. Think about how this setup differs from the previous one and think about the impact of the side wind on the performance of the car and the flow behavior around it
