SimScale simulation projects by lw4992my | Page 1

lw4992my's profile

This project shows an example of how the external fluid flow around a submarine can be simulated.

This project shows the transient thermal analysis of chips mounted on a printed circuit board (PCB).

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

How to simulate the airflow around a building is demonstrated in this project.

In this project a linear stress analysis of a pressure vessel is demonstrated.

Simulation of the heat transport inside a specific heat sink - copy from @cloock's project to test meshing and sim.

This project demonstrates the stress analysis of femur bone subjected to different amounts of load.

Response of a crane structure to tip load

This project shows the transient thermal analysis of a car braking system.

In this project a nonlinear static structural analysis of a hand tool is demonstrated.

This project shows a fast and highly automated way to create a virtual wind tunnel for aerodynamics simulations.

This project demonstrates how to simulate the airflow around a simplified model of a large city.

This project simulates airfow around a Semi-Truck with container trailer.

Effects of the free surface on the hydrodynamic performance of a dolphin swimming close to the water surface. The CAD file is taken from: https://grabcad.com/library/dolphin-7

This project validates distributed pressure and nodal stresses for a thick plate under pressure load.

With this project I am investigating the meshing options of snappyHexMesh

Tutorial for meshing of valve geometry with Snappy Hex Mesh

This project performs a heat transfer analysis of a sphere under convection.

This project simulates laminar flow through a straight circular pipe.

This project simulates the flow inside a car cabin.

A thermal simulation of a worm gearbox housing is demonstrated within this project.

This project shows how the cooling of a room can be simulated using SimScale.

This project shows how to simulate the airflow inside an office space.

The project illustrates how to simulate airflow around a complex F1 vehicle.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Meshing of  a simple geometry using Automatic snappyHexMesh

This project demonstrates the thermal effect of moving laser on a tooth.

Original project of @juliogallinaro

Public Profile

lw4992my's profile