SimScale simulation projects by lukejwhite9 | Page 1

lukejwhite9's profile

My goal is to test my linear heat sink design, I am planning on testing the thermal reduction of the heat sink along with the passive cooling effect of the wind that a fan would provide.  
This eatsink wil be attached to a medium power horticultural LED module (103.4w) and will be situated in a grow room with an average temp of 25c

observe the thermal reduction of a linear heat sink

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

lukejwhite9's profile