Set up your own cloud-native simulation in minutes.Start Simulating Now
272
0
2 Geometries
2 Meshes
1 Simulation setup
2 ResultsAnalyze if Swing Arm Press jig components will fail under press of 7.5 MPa and 80mm cylinder bore.
by Jon_WildeJon_Wilde
lpalad created this project
over 5 years ago
2 Geometries 2 Meshes 1 Simulation setup 2 ResultsAnalyze if Swing Arm Press jig components will fail under press of 7.5 MPa and 80mm cylinder bore.
