Set up your own cloud-native simulation in minutes.Start Simulating Now
0
1
8 Geometries
12 Meshes
12 Simulation setups
15 ResultsConcept E chassis geometry based on P10R9, checked with the established LC01 full-GVW linear static setup: ten RBE3 support groups, 350 kg cabin load, 1,619.25 kg rear/body load, and the P10R9 steel and mesh configuration. Concept E retains two 5 mm tower doublers and four 5 mm lower-subframe corner gussets; the highlighted side tubes are removed.
by simscalesimscale
8 Geometries 12 Meshes 12 Simulation setups 15 ResultsConcept E chassis geometry based on P10R9, checked with the established LC01 full-GVW linear static setup: ten RBE3 support groups, 350 kg cabin load, 1,619.25 kg rear/body load, and the P10R9 steel and mesh configuration. Concept E retains two 5 mm tower doublers and four 5 mm lower-subframe corner gussets; the highlighted side tubes are removed.
nightwatch337 created this project
14 days ago
longtale_adven copied this project
14 days ago
