SimScale simulation projects by lkr | Page 1

lkr's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

creat a ring with a pressure taken from a txt.File or csv.File

In this project the eigenfrequencies and the corresponding eigenmodes of a rotor have been computed with SimScale.

This project performs a frictionless contact analysis between two spheres.

The stress distribution within an impeller is analyzed under vibration load due to bearing tolerances.

Copy of the project Ring_with_Pressure - creat a ring with a pressure taken from a txt.File or csv.File by @lkr

Public Profile

lkr's profile