SimScale simulation projects by lkelum | Page 1

lkelum's profile

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Mold Preheating before Tyre Curing by Heat Transfer Simulation

In this project basics of conduction, convection and radiation are demonstrated.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The air flow around a horizontal axis wind turbine HAWT and the resulting forces on the rotor are simulated.

Induction Heating technology for Mold Preheating

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

lkelum's profile