SimScale simulation projects by l_trefiletti | Page 1

l_trefiletti's profile

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

Formula Student and Formula SAE Workshop 2 - Cooling Plate

This project contains everything you need to work on the second homework assignment of the drone workshop

This project involves the simulation of ventilation in an aircraft cabin. There are 6 comparison configurations with 3 different inlets and 2 outlets.

This project demonstrates the usage of rotating zones

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

This project is aimed at creating a parametric analysis of heat distribution within a 3D printer.

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

The effect of numerics on the simulation quality and convergence time.

In this project, thermostructural analysis of two different designs of spark plug were performed

In this project basics of conduction, convection and radiation are demonstrated.

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Homework assignment project for the Air-Conditioning and Ventilation webinar session 2.

External Flow Simulation of a UAV plane. 


CFD analysis of  F1 car's RearWing,  freely modified by CAESES sw

This project shows how to simulate the airflow inside an office space.

This project contains everything you need to work on your homework assignement

This project contains resources for Session 1 of the F1 Workshop

Propeller design for a quadcopter (Blade AoA and angular velocity)

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

3D Printer Homework Session 1 - heat distribution within the extruder

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

partitioned CAD model-3D printer assembly

The air flow around a football is simulated with focus on the effects of the pattern on the football surface and spinning of the ball.

This simulation models the formation of wakes behind a boat in water

This project simulates the natural convection in a kitchen

This skateboard simulation project tests the durability of a skateboard when it lands on the ground with a rider on it. This project was presented for the Using SimScale with Autodesk Fusion 360 Webinar. A step-by-step by tutorial can be found here: https://www.simscale.com/forum/t/step-by-step-tutorial-impact-analysis-of-a-skateboard/37430

FSAE Trackside Aero Session 1 - Ride Height

Building Vortex Shedding and Wind Load Analysis

FEA for Formula Student/FSAE - Front Upright WS1

DBF Workshop Session 2 - Bending of an Airfoil Frame

Public Profile

l_trefiletti's profile