SimScale simulation projects by kushigumpularu | Page 1

kushigumpularu's profile

Study of CO contamination inside a car park

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial.

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

Conjugate heat transfer simulation tutorial.

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Tutorial project for linear static analysis of a crane

This tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

This project shows the bending of an Aluminium pipe through rolling process.

Analyse the duct positioning to have effective ventilation system

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kushigumpularu's profile