SimScale simulation projects by klukedsouza | Page 1

klukedsouza's profile

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Analysis of Shock Formation at 0.4 M and 0.9 M

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Analysis of reduction in induced drag with winglets

Public Profile

klukedsouza's profile