SimScale simulation projects by khimbok | Page 1

khimbok's profile

SkySierra Type B - All Doors and Windows Opened

Testing using ABL for Wind Profile instead of fixed value. Model and Domain same as TISKL Sports Hall 2.

Other settings (except meshing and solutions control) - refers to this tutorial - https://www.simscale.com/docs/tutorials/smoke-propagation-chimney/

Changed ground condition. Only no slip within context. Rest of domain set to slip

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

https://www.simscale.com/webinars-workshops/validate-natural-ventilation/

500mmH opening, Flat canopy with overhang, no drop

Roof over Alley 1, High Canopy at Drop Off

This model is with Roof Canopy over Alley 1

Testing strategies to reduce wind driven rain

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Using PWS DC model to test modeling of pedestrian wind comfort

Studying the risk of re-circulation of warm air for the ACCU on 1 DC Block - with AC ledge of each floor

Investigation of air flow and heat built up between DC blocks from ACCU for DX type CRAC units

Study on risk of recirculation of exhaust and intake air to genset

With gap refinement set to 0 (instead of 0.05)

Hot Aisle Containment. Downward CRAC uni supply

2kW Racks with floor supply and Hot Aisle Containment

Test Model with Ceiling Fan & 2 Occupants

Hall with 1 Row Server and simplified geometry

Public Profile

khimbok's profile