SimScale simulation projects by kbui | Page 1

kbui's profile

The first simulation to get a bench mark understanding of the current design

2020-05-24 Bell-Crank Study with Pins

Altered the assembly to include pins for more accurate simulation

2020-05-24 Bell-Crank Study

Stress analysis of bell-crank for midnight sun solar car

FEA for Formula Student/FSAE - Front Upright

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Incompressible Fluid Flow analysis of two globe valves

Files given from the course do not have properly split faces.

In this exercise, you will complete a laminar pipe flow analysis

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

Working through the tutorial on standard meshing.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kbui's profile